Failed to get cmg metadata 0x87d00231 - Feb 1, 2021 · I have set up Configuration Manager by the book. I had to integrate it with an existing WSUS and SQL Server. I have not been able to successfully push the agent to the three workstations that I tried. Oddly, one workstation installed a little better than the other one, but neither is fully...

 
[ccmsetup] Failed to get MDM_ConfigSetting instance, 0x80041010_. Menpercent27s tapered trousers

Only this laptop have issue in installing SCCM client. What are the other ways to make SCCM communcation with MP.Locationservices.log indicates "Failed to get CMG metadata 0x87d00231" and if I restart the smsagent service while internet connected I'm seeing what looks like it's referencing a certificate error: Successfully queued event on HTTP/HTTPS failure for server 'CMG.CENTRALUS.CLOUDAPP.AZURE.COM'.Feb 6, 2020 · Logged. #1. February 06, 2020, 08:03:52 AM. 0x87D00669 = Not able to get software updates content locations at this time. This means the client can't find the update in the DP's. Please make sure your package is distributed and boundaries set up. However, I've hit a wall when switching the MP over to HTTPS. The clients still continue to use HTTP! For the record, the overall Client Security settings are still set to 'HTTP or HTTPS' (without Enhanced HTTP turned on). From CCMEVAL I can see that it clearly tries to use HTTP. Client is set to use HTTPS when available. The current state is 480.RegTask: Failed to refresh site code. Error: 0x8000ffff ClientIDManagerStartup 23/08/2021 14:39:42 14956 (0x3A6C) Sleeping for 289 seconds before refreshing location services. ClientIDManagerStartup 23/08/2021 14:39:43 14956 (0x3A6C) LocationService.Log - Security settings update detected, restarting CcmExec.If so, please check if the SSL certificate common name (host name field) is correct and the hostname the client is connecting to is matched with the certificate's subject or subject alternate name. It is recommended that we could check the certificate and use the FQDN of the server in the Common Name section.Hello guys, Since two days ago, our Windows 10 client computers stopped reporting currently logged on users and are showing offline, although they're..Feb 1, 2021 · I have set up Configuration Manager by the book. I had to integrate it with an existing WSUS and SQL Server. I have not been able to successfully push the agent to the three workstations that I tried. Oddly, one workstation installed a little better than the other one, but neither is fully... May 26, 2017 · MCSE Cloud Platform and Infrastructure. MCSE: Mobility. MCSE: Data Management and Analytics. MCSE Productivity. Find technical communities in your area. MSDN Forums. Security Bulletins & Advisories. Microsoft Community Forums. Apr 15, 2020 · we set up a testing environment for bitlocker purposes and because of new features for bitlocker we updated yesterday from 1910 to 2002. Update was done fine but now our 3 clients dont contact SCCM anymore. we tried to install new ccm client manually but ccmsetup.log shows a lot of errors. After checking PKI we solved on problem and clients can ... Below are the result from the CA. [Green] CMG in ready state. [Red] Connect to the CMG service to see if it's running. [Red] Check configuration setting of the CMG service is up to date. [Yellow] Check connection status of CMG connection points. [Green] Check CMG enabled site systems roles. [Red] testing the CMG channel for management point.Jan 4, 2017 · You are right regarding the security concerns but actually it's a POC server and after that we will replicate to a production environment. And regarding the certificate the CRLis listed on the server and client certificate as below screenshots. After upgrading from SCCM 2203 to 2207, the upgrade failed, we were getting an error, failed to update key vault, bad request. so in an effort to work around the problem, we decided we could try to tear out the existing CMG and reimplement using all new names and to a new resource group, However, the new cmg fails to deploy with the same exact ...In the Configuration Manager console, go to Administration > Site Configuration > Servers and Site System Roles, and then select <SiteSystemName> in the right pane. In the bottom pane, right-click Software Update Point and then click Properties. On the General tab, specify or verify the WSUS configuration port numbers.Jul 15, 2019 · Once the device token works, the request is sent to internal MP via CMG to get a CCM token. Client must get a CCM token successfully before accessing internal resources. CCM_STS.log available on the Management Point enabled for CMG traffic is a good place to know if CCM token was issued successfully. ProcessRequest - Start CCM_STS To Resolve: Change the registry key value (DisableRenegoOnClient) from 1 to 0 and restart the CCMExec service. reg add "hklm\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL" -v DisableRenegoOnClient /t REG_DWORD /d 0 /f. powershell -executionpolicy bypass -command restart-service ccmexec. PS.Sep 27, 2020 · CMG Connection point. CMG status is ready and connection point is in Connected status. On the client machine--> Control panel--> Configuration Manager-->Network tab shows the Internet-based MP FQDN correctly which is the CMG. Assigned the new MP site system to the boundary group and confirmed that the client is able to identify the available MPs. In the Configuration Manager console, go to Administration > Site Configuration > Servers and Site System Roles, and then select <SiteSystemName> in the right pane. In the bottom pane, right-click Software Update Point and then click Properties. On the General tab, specify or verify the WSUS configuration port numbers.Hi All, I uncheck the check box from Site Properties which disable CRL check. I reinstalled client with SMSMP and /NoCRLCheck switches and Client is now appearing in the Console as Active.Post to https:///ccm_system/request failed with 0x87d00231. LOCATIONSERVICES: Unable to retrieve AD site membership marking this as solved as it seems like i am stuck with PKI for the time being :( it's a pain because it stops the SCCM client registering quickly enough after a task sequence and I get loads of PCs without hardware inventory because IT shut them down and shipped them out to someone before the client registered, or before it ran hardware inventory.by MrOarsome Issue with CMG and clients authenticating via Hybrid Azure AD: Failed to send registration request message. Error: 0x87d00231 I have gone through the steps of setting up a CMG with with SCCM CB 1906 and all seems to be behaving. However, when my test clients seem to be unable to connect to the CMG service.Unfortunately, 0x87d00231 is a fairly generic error message that pretty much just means “something went wrong”. If you Google it, you will see a variety of solutions ranging from reinstalling the client to checking your PKI environment is functioning correctly or checking the health of your Management Point (s).Oct 3, 2022 · Choose the certificate type. Globally unique name. Issue the certificate. Create a DNS CNAME alias. Next steps. Applies to: Configuration Manager (current branch) The first step when you set up a cloud management gateway (CMG) is to get the server authentication certificate. The CMG creates an HTTPS service to which internet-based clients ... Sounds like you need to reconfigure it to use HTTPS. We've resolved this, apparently it was becuase we needed to use /mp: https://SCCMServer.FQDN for an install parameter. We were missing the "https://" previously.[ccmsetup] Failed to get MDM_ConfigSetting instance, 0x80041010_Jun 21, 2020 · we do have the cmg configured as a distribution point. CMG distro was up and working prior to the upgrade, however this would be the first time a client upgrade would have happened over cmg. we now have around 20 devices with a client, however I believe these were likely devices that came back on the intranet and got the client while onsite. Good afternoon Everyone! So my SCCM client will not install nor adequately communicate with any systems that did not already have the client installed prior to my MP failing. Luckily I fixed my MP, but I can only communicate with clients that were previously installed. And it communicates... RegTask: Failed to send registration request message. Error: 0x87d00231 ClientIDManagerStartup 5/18/2016 12:20:21 PM 456 (0x01C8) RegTask: Failed to send registration request. Error: 0x87d00231 ClientIDManagerStartup 5/18/2016 12:20:21 PM 456 (0x01C8) [RegTask] – Sleeping for 960 seconds …We decided to tackle the errors in SMS_CloudConnector.log that indicated the connector role was unable to connect on port 10140, even though according to the documentation that port (and the rest of the range, 10124-10156) were only required if running more than one VM instance for the CMG. This required a firewall change to allow the ...This check occurs every 25 hours, when the SMS Agent Host service starts or when it detects a network change. When the client connects to the site and learns of a CMG, it automatically updates this valu e. After learning about CMG, Internet Management Point values will be updated. SCCM Client side log validation The ping test will fail, that’s normal, but it should still resolve the cmg host name with an ip. If you see a warning in the browser it means that your device does not trust the cmg server authentication certificate, you’ll have to fix that issue first. Your device needs a client auth cert that chains to the same root.Jun 9, 2022 · In the SCCM CB console, choose Administration. 2. In the Administration workspace, expand Site Configuration, choose Sites, and then choose the primary site server. 3. Right-click on the Primary site server, choose Properties and choose the Client Computer Communication tab. This article describes an issue in which content can't be downloaded from a cloud management gateway (CMG) that functions as a cloud distribution point (DP), and you receive an WINHTTP_CALLBACK_STATUS_FLAG_CERT_CN_INVALID error message. Original product version: Configuration Manager (current branch) Original KB number: 4495265 SymptomsFailed to get ConfigMgr token with Azure AD token. Status code is '401' and status description is 'CMGConnector_Unauthorized'. A possible reason for this failure is the CMG connection point failed to forward the message to the management point. The management point returned the following error: 'Unauthorized'. Jan 15, 2021 · Specify a name and select Cloud Management, click Next. In this step, the Azure Administrator will be required to create the web app and native client app. Click on Browse for the Web app. Click on Create. Click the Sign in and provide Azure administrator credentials. Default names do just fine. Jun 9, 2022 · In the SCCM CB console, choose Administration. 2. In the Administration workspace, expand Site Configuration, choose Sites, and then choose the primary site server. 3. Right-click on the Primary site server, choose Properties and choose the Client Computer Communication tab. Once the device token works, the request is sent to internal MP via CMG to get a CCM token. Client must get a CCM token successfully before accessing internal resources. CCM_STS.log available on the Management Point enabled for CMG traffic is a good place to know if CCM token was issued successfully. ProcessRequest - Start CCM_STS[ccmsetup] Failed to get MDM_ConfigSetting instance, 0x80041010_Apr 15, 2020 · we set up a testing environment for bitlocker purposes and because of new features for bitlocker we updated yesterday from 1910 to 2002. Update was done fine but now our 3 clients dont contact SCCM anymore. we tried to install new ccm client manually but ccmsetup.log shows a lot of errors. After checking PKI we solved on problem and clients can ... Apr 30, 2020 · Today I wanted to share with you a series of short videos that offer tips on how to address and mitigate common issues you might encounter when setting up the cloud management gateway (CMG) as part of your Configuration Manager environment. Before we begin, a quick reminder that the Microsoft Endpoint Manager admin center can be accessed ... Mar 7, 2019 · Connect to the CMG service to see if it's running. Failed to connect to the CMG service. Unexpected response status code is NameResolutionFailure. For more information, see SmsAdminUI.log. Check configuration settings of the CMG service is up to date. Configuration version of the CMG service should be 5. Failed to get CMG service metadata. When I run the connection analyzer it's failing on a couple of steps: Failed to connect to the CMG service. Unexpected response status code is NameResolutionFailure. For more information, Configuration version of the CMG service should be 1. Failed to get CMG service metadata.Dec 10, 2013 · Hi All, I uncheck the check box from Site Properties which disable CRL check. I reinstalled client with SMSMP and /NoCRLCheck switches and Client is now appearing in the Console as Active. May 18, 2022 · SCCM 1806 onwards, you have a new in-console utility called CMG connection analyzer. This utility is for real-time verification to help CMG-related troubleshooting. The SCCM in-console utility checks the current status of the service and the communication channel through the CMG connection point to any management points that allow CMG traffic. In the Site Properties under client communications the option 'Check CRL' was checked. In our environment the CRL is not published. This setting caused the authentication to fail as it is unable to retrieve the CRL information. After unchecking that option and reinstalling the SCCM agent from the primary site, the authentication is now working.You are right regarding the security concerns but actually it's a POC server and after that we will replicate to a production environment. And regarding the certificate the CRLis listed on the server and client certificate as below screenshots.Failed to get ConfigMgr token with Azure AD token. Status code is '401' and status description is 'CMGConnector_Unauthorized'. A possible reason for this failure is the CMG connection point failed to forward the message to the management point. The management point returned the following error: 'Unauthorized'. The CRL is not reachable from internet so I disabled CRL check on the site and during setup. Does it matter if I disabled CRL checking on site after everything was setup I can't exactly remember when I changed the setting.Unfortunately, 0x87d00231 is a fairly generic error message that pretty much just means “something went wrong”. If you Google it, you will see a variety of solutions ranging from reinstalling the client to checking your PKI environment is functioning correctly or checking the health of your Management Point (s).May 19, 2020 · Failed to get ConfigMgr token with Azure AD token. Status code is '401' and status description is 'CMGConnector_Unauthorized'. A possible reason for this failure is the CMG connection point failed to forward the message to the management point. ClientLocation 19/08/2020 17:39:37 2624 (0x0A40) Raising pending event: instance of CCM_CcmHttp_Status { DateTime = "20200819163937.494000+000"; HostName = "cmg.cmg.net"; HRESULT = "0x80072f8f"; ProcessID = 444; StatusCode = 8; ThreadID = 2624; }; ClientLocation 19/08/2020 17:39:37 2624 (0x0A40) Failed in WinHttpSendRequest API, ErrorCode ...Sep 17, 2020 · We have a customer that has a functional ConfigMgr (CB 2006) environment with a newly configured CMG and Co-Management enabled. All of the CMG related settings and EHTTP settings are enabled. Machines that are Hybrid-AD joined and already have the ConfigMgr client are able to communicate and download software from the CMG. Sep 27, 2020 · CMG Connection point. CMG status is ready and connection point is in Connected status. On the client machine--> Control panel--> Configuration Manager-->Network tab shows the Internet-based MP FQDN correctly which is the CMG. Assigned the new MP site system to the boundary group and confirmed that the client is able to identify the available MPs. The ping test will fail, that’s normal, but it should still resolve the cmg host name with an ip. If you see a warning in the browser it means that your device does not trust the cmg server authentication certificate, you’ll have to fix that issue first. Your device needs a client auth cert that chains to the same root.The Application Catalog role configured an IIS redirect on the default web site so that all requests to the server were getting redirected to the Application catalog. Simply disabling the redirect and restarting IIS was enough to get our client install working across the CMG using AAD authentication with no PKI required.Oct 27, 2018 · Expert-led, virtual classes. Microsoft Virtual Academy. Free Windows Server 2012 courses. Microsoft Official Courses On-Demand. MCSE Cloud Platform and Infrastructure. MCSE: Mobility. MCSE: Data Management and Analytics. MCSE Productivity. Find technical communities in your area. Mar 7, 2019 · Connect to the CMG service to see if it's running. Failed to connect to the CMG service. Unexpected response status code is NameResolutionFailure. For more information, see SmsAdminUI.log. Check configuration settings of the CMG service is up to date. Configuration version of the CMG service should be 5. Failed to get CMG service metadata. Apr 29, 2021 · When running the CMG validation checker All checks are successful except the last one and it reports the following error: Succeed to get ConfigMgr token with Azure AD token. Failed to refresh MP location. Status code is ‘500’ and status description is ‘CMGConnector_InternalServerError’. A possible reason for this failure is the CMG ... ClientIDManagerStartup 3/16/2018 9:13:33 AM 7968 (0x1F20) CCM Identity is in sync with Identity stores ClientIDManagerStartup 3/16/2018 9:13:33 AM 7968 (0x1F20) Begin searching client certificates based on Certificate Issuers ClientIDManagerStartup 3/16/2018 9:13:33 AM 7968 (0x1F20) Certificate Issuer 1 [CN=Entrust Root Certification Authority ...Jul 21, 2023 · The Clients use internal PKI certs and CMG uses a public wildcard cert. When I put one of the Clients on the Internet and tried to get an app installed, the attempt failed, as well, the Client went grey in SCCM console. I checked the Client settings and found it knows about CMG, but cannot connect to it. in ccmMessaging.log I saw: Sep 6, 2021 · Prajwal Desai. Prajwal Desai is a Microsoft MVP in Intune and SCCM. He writes articles on SCCM, Intune, Windows 365, Azure, Windows Server, Windows 11, WordPress and other topics, with the goal of providing people with useful information. Good afternoon Team. I hope you are well. I have a question, in my client we are installing the client via client push, at the end gives me as code 0 but the client still does not register. When reviewing the log file…The CMG connection analyzer tool fails when testing the CMG channel for a management point that uses a replica database. Errors resembling the following are recorded in the CCM_STS.log Return code: 500, Description: Failed to get info from DB, System.Data.SqlClient.SqlException (0x80131904): Invalid object name 'fn_GetUserResourceMapping'.Choose the certificate type. Globally unique name. Issue the certificate. Create a DNS CNAME alias. Next steps. Applies to: Configuration Manager (current branch) The first step when you set up a cloud management gateway (CMG) is to get the server authentication certificate. The CMG creates an HTTPS service to which internet-based clients ...It works fine by changing the "UserCost" value as '0', after that CM client installation gets worked.Yes, the clients have a trusted root to the internal PKI used for CMG. Thank you, I have installed the CMG connection point. The MP is installed using E-HTTP. In this case the CMG connection won't require a client authentication certificate. Is this correct ?Successfully queued event on HTTP/HTTPS failure for server 'CMG.CLOUDAPP.NET'. CcmMessaging 08-02-2022 9.41.45 AM 23900 (0x5D5C) Post using domain\user security context failed due to Integrated Windows Authentication failure CcmMessaging 08-02-2022 9.41.45 AM 23900 (0x5D5C)Jan 9, 2018 · The CRL is not reachable from internet so I disabled CRL check on the site and during setup. Does it matter if I disabled CRL checking on site after everything was setup I can't exactly remember when I changed the setting. Since we are using Internal PKI cert on CMG, I have exported the Root certificate and imported into DMZ server, Installation went fine and client was able to communicate well after the installation. It received all policies and able to push software updates/apps.Feb 2, 2021 · Feb 2, 2021, 2:30 AM. Hi all, We have SCCM 2002 , after the CMG implementation , when we force the client to internet , sccm client not reporting to SCCM site server, with below error , any suggestion pls. Failed to get CMG metadata 0x87d00227. Failed to get management points from XXXXX. Error 0x87d00227. Connect to the CMG service to see if it's running. Failed to connect to the CMG service. Unexpected response status code is NameResolutionFailure. For more information, see SmsAdminUI.log. Check configuration settings of the CMG service is up to date. Configuration version of the CMG service should be 5. Failed to get CMG service metadata.I have set up a cloud management gateway in my MECM Environment. PKI Infrastructure is also in place, and it is working as expected. The MECM clients function fine when communicating with the local MP (on-premises MP); however, clients cannot discover a…Failed to get ConfigMgr token with Azure AD token. Status code is '403' and status description is 'CMGConnector_Un-authorizedrequest'. A possible reason for this failure is the CMG connection point failed to forward the message to the management point. The management point returned the following error: 'Un-authorizedrequest'.Failed to get ConfigMgr token with Azure AD token. Status code is '401' and status description is 'CMGConnector_Unauthorized'. A possible reason for this failure is the CMG connection point failed to forward the message to the management point. The management point returned the following error: 'Unauthorized'.Apr 15, 2020 · we set up a testing environment for bitlocker purposes and because of new features for bitlocker we updated yesterday from 1910 to 2002. Update was done fine but now our 3 clients dont contact SCCM anymore. we tried to install new ccm client manually but ccmsetup.log shows a lot of errors. After checking PKI we solved on problem and clients can ... Dec 16, 2022 · Thought id throw 2 cents in here, Brilliant mark up Prajwal, been a fan for awhile. if your running an earlier version of SCCM – Ver 2107. MS came back with a workaround (and officially confirmed it as a bug still present in 2107). Failed to get CMG service metadata. For more information, see SmsAdminUI.log." The step "Testing the CMG channel for management point: 'thenameoftheMP'" gives me a new error, "Failed to refresh MP location. Selected client certificate is not trusted by the CMG service.CMG Connection point. CMG status is ready and connection point is in Connected status. On the client machine--> Control panel--> Configuration Manager-->Network tab shows the Internet-based MP FQDN correctly which is the CMG. Assigned the new MP site system to the boundary group and confirmed that the client is able to identify the available MPs.Jan 4, 2017 · You are right regarding the security concerns but actually it's a POC server and after that we will replicate to a production environment. And regarding the certificate the CRLis listed on the server and client certificate as below screenshots. Jun 22, 2017 · We decided to tackle the errors in SMS_CloudConnector.log that indicated the connector role was unable to connect on port 10140, even though according to the documentation that port (and the rest of the range, 10124-10156) were only required if running more than one VM instance for the CMG. This required a firewall change to allow the ... After the process of installing the workgroup clients in the internal network is completed and the clients go to the Internet, they are unable to communicate the cmg. I think the root problem is that they were unable to register to the internal MP-HTTPS server during the task and get the token. PKI cert for cmg issued from our internal CA.Feb 2, 2021 · Feb 2, 2021, 2:30 AM. Hi all, We have SCCM 2002 , after the CMG implementation , when we force the client to internet , sccm client not reporting to SCCM site server, with below error , any suggestion pls. Failed to get CMG metadata 0x87d00227. Failed to get management points from XXXXX. Error 0x87d00227. Failed to get ConfigMgr token with Azure AD token. Status code is '401' and status description is 'CMGConnector_Unauthorized'. A possible reason for this failure is the CMG connection point failed to forward the message to the management point. The management point returned the following error: 'Unauthorized'.Failed to get CMG service metadata. For more information, see SmsAdminUI.log." The step "Testing the CMG channel for management point: 'thenameoftheMP'" gives me a new error, "Failed to refresh MP location. Selected client certificate is not trusted by the CMG service.Post to https:///ccm_system/request failed with 0x87d00231. LOCATIONSERVICES: Unable to retrieve AD site membershipTo Resolve: Change the registry key value (DisableRenegoOnClient) from 1 to 0 and restart the CCMExec service. reg add "hklm\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL" -v DisableRenegoOnClient /t REG_DWORD /d 0 /f. powershell -executionpolicy bypass -command restart-service ccmexec. PS.Dec 16, 2022 · Thought id throw 2 cents in here, Brilliant mark up Prajwal, been a fan for awhile. if your running an earlier version of SCCM – Ver 2107. MS came back with a workaround (and officially confirmed it as a bug still present in 2107).

MCSE Cloud Platform and Infrastructure. MCSE: Mobility. MCSE: Data Management and Analytics. MCSE Productivity. Find technical communities in your area. MSDN Forums. Security Bulletins & Advisories. Microsoft Community Forums.. A line bob with bangs

failed to get cmg metadata 0x87d00231

Jan 15, 2021 · Specify a name and select Cloud Management, click Next. In this step, the Azure Administrator will be required to create the web app and native client app. Click on Browse for the Web app. Click on Create. Click the Sign in and provide Azure administrator credentials. Default names do just fine. Mar 7, 2019 · Connect to the CMG service to see if it's running. Failed to connect to the CMG service. Unexpected response status code is NameResolutionFailure. For more information, see SmsAdminUI.log. Check configuration settings of the CMG service is up to date. Configuration version of the CMG service should be 5. Failed to get CMG service metadata. Choose the certificate type. Globally unique name. Issue the certificate. Create a DNS CNAME alias. Next steps. Applies to: Configuration Manager (current branch) The first step when you set up a cloud management gateway (CMG) is to get the server authentication certificate. The CMG creates an HTTPS service to which internet-based clients ...Feb 3, 2021 · CMG-<cloud_service_name>-ProxyService_IN_0-CMGSetup.log: Records details about the second phase of the cloud management gateway deployment (local deployment in Azure). CloudMgr.log : Records details about deploying the cloud management gateway service, ongoing service status, and use data associated with the service. Mar 5, 2020 · One of our stations fails to connect to SCCM, the log errors are: RegTask: Failed to send registration request message. Error: 0x87d00231. RegTask: Failed to send registration request. Error: 0x87d00231. If this is related then the MP is set to HTTP. Jun 22, 2017 · We decided to tackle the errors in SMS_CloudConnector.log that indicated the connector role was unable to connect on port 10140, even though according to the documentation that port (and the rest of the range, 10124-10156) were only required if running more than one VM instance for the CMG. This required a firewall change to allow the ... When running the CMG validation checker All checks are successful except the last one and it reports the following error: Succeed to get ConfigMgr token with Azure AD token. Failed to refresh MP location. Status code is ‘500’ and status description is ‘CMGConnector_InternalServerError’. A possible reason for this failure is the CMG ...Failed to get ConfigMgr token with Azure AD token. Status code is '403' and status description is 'CMGConnector_Un-authorizedrequest'. A possible reason for this failure is the CMG connection point failed to forward the message to the management point. The management point returned the following error: 'Un-authorizedrequest'.Oct 28, 2022 · In the Configuration Manager console, go to Administration > Site Configuration > Servers and Site System Roles, and then select <SiteSystemName> in the right pane. In the bottom pane, right-click Software Update Point and then click Properties. On the General tab, specify or verify the WSUS configuration port numbers. If so, please check if the SSL certificate common name (host name field) is correct and the hostname the client is connecting to is matched with the certificate's subject or subject alternate name. It is recommended that we could check the certificate and use the FQDN of the server in the Common Name section.Apr 30, 2020 · Today I wanted to share with you a series of short videos that offer tips on how to address and mitigate common issues you might encounter when setting up the cloud management gateway (CMG) as part of your Configuration Manager environment. Before we begin, a quick reminder that the Microsoft Endpoint Manager admin center can be accessed ... Once the device token works, the request is sent to internal MP via CMG to get a CCM token. Client must get a CCM token successfully before accessing internal resources. CCM_STS.log available on the Management Point enabled for CMG traffic is a good place to know if CCM token was issued successfully. ProcessRequest - Start CCM_STSApr 15, 2020 · we set up a testing environment for bitlocker purposes and because of new features for bitlocker we updated yesterday from 1910 to 2002. Update was done fine but now our 3 clients dont contact SCCM anymore. we tried to install new ccm client manually but ccmsetup.log shows a lot of errors. After checking PKI we solved on problem and clients can ... After upgrading SCCM to the latest version, the OSD stopped working completely. The smsts.log revealed the error: "Sending with Winhttp failed 80072f8f." I'llOct 3, 2022 · Client verifies the CMG server authentication certificate: PKI certificate: Client requires the root CA of the CMG certificate in its local store. Third-party certificate: Clients automatically validate a certificate with its root CA published on the internet. CMG, CMG connection point, and management point validate Azure AD and CCM tokens. Jul 22, 2019 · My lab recently started playing up when I noticed clients weren’t receiving any new policies. TDLR (it’s not even that long!): a while ago I moved my SUP/WSUS off host from the site server that also hosted a MP. One of our stations fails to connect to SCCM, the log errors are: RegTask: Failed to send registration request message. Error: 0x87d00231. RegTask: Failed to send registration request. Error: 0x87d00231. If this is related then the MP is set to HTTP.Jan 4, 2017 · You are right regarding the security concerns but actually it's a POC server and after that we will replicate to a production environment. And regarding the certificate the CRLis listed on the server and client certificate as below screenshots. Jul 22, 2019 · My lab recently started playing up when I noticed clients weren’t receiving any new policies. TDLR (it’s not even that long!): a while ago I moved my SUP/WSUS off host from the site server that also hosted a MP. .

Popular Topics